Ship-deck-covering, 2-component epoxy resin system
By mixing with fire dried silica sand for using of primary deck covering.
- joint less
- very fast curing
- high abrasion resistance
- very good adhesion to pre-treated steel deck surfaces resp. on primary deck coverings type TEFROTEX® or TEFROKA®
- resistant against sea-water
- withstands thinned mineral acids/ lyes, mineral oil, grease
- open for foot traffic after 12 hours
Preparation of Substructure:
The areas have to be dry, clean and free from rust, oil and other foreign matters. Steel-deck areas blasted and treated with an epoxy-primer which is fast to saponification have to be treated with one coat TEFROTEX ® SF PRIMER.
Other types of deck upon request.
Thickness of coat: 2 - 30 mm * *
Density (+ 20 °C): approx. 1,7 kg/ m²/ mm
Solid state by volume: approx. 100 %
TEFROKA® EP complies with FTP-Code Part 5 and Part 6.